free ns0-501 (network appliance implementation engineer-san)
testinside offers free demo for nac-nie ns0-501 exam (network appliance implementation engineer-san). you can check out the interface, question quality and usability of our practice exams before you decide to buy it. we are the only one site can offer demo for almost all products.
you can go to http://www.testinside.com/ns0-501.htm and buy it
ns0-501 Explanations
This ns0-501 product does not include explanations at the moment. If you are interested in providing explanations
for this exam, please contact sales(at)TestInside.com.
Testinside
TestInside Help You Pass Any IT Exam
1. Identify the SAN topology that provides best performance and scalability.
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B
2. What could a F_Port represent?
A. A Fibre Channel hub’s connection to the FC switch.
B. A storage controller’s connection to the FC switch.
C. An inter-switch link connection between FC switches.
D. An unused port on the FC switch.
Answer: B
3. ACME Corporation has five Windows servers that are dual-attached, four Linux servers that are
single-attached, and ten dual-attached Solaris servers. ACME wants a highly available architecture.
A FAS3020C with all onboard FC ports connected to the fabric is being proposed.
Determine how many FC ports are required and the fabric layer.
A. single fabric with 38 ports
B. fabrics with 38 ports
C. dual fabrics with 42 ports
D. single fabric with 42 ports
Answer: C
4. A Solaris 9 host is not seeing all the expected paths to a LUN, but the storage controller sees all the
initiators from the host. What is misconfigured?
A. the zones
B. the portsets
C. the igroups
D. the cabling
Testinside
TestInside Help You Pass Any IT Exam
Answer: C
5. Which utility on Windows 2003 could be used to collect information about firmware and driver versions
for an Emulex LP10000 HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E
6. Which utility on Solaris 10 could be used to collect information about firmware and driver versions for an
Emulex LP10000 HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E
7. Which utility on Solaris 10 would collect information about firmware and driver versions for a Qlogic
QLA2340 HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D
8. Which command would collect information about the firmware version running on a Brocade 4100 FC
switch?
Testinside
TestInside Help You Pass Any IT Exam
A. version
B. switchshow
C. show version
D. show switch
Answer: A
9. Which command would collect information about the firmware version running on a Cisco 9513 FC
switch?
A. version
B. switchshow
C. show switch
D. show version
Answer: D
10. What is the approximate capacity overhead of a cloned flexible volume at creation?
A. 200%
B. 100%
C. 50%
D. 0%
Answer: D
11. Select the difference between an iSCSI LUN and a FC LUN.
A. There is no difference.
B. FC LUNs have different serial numbers than iSCSI LUNs.
C. iSCSI LUNs snapshots take longer than FC LUNs snapshots.
D. A FC LUN is bigger and consumes more space than an iSCSI LUN.
Answer: A
12. ACME corporation currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution. The optimal
Testinside
TestInside Help You Pass Any IT Exam
solution would include ________.
A. SnapMover and Fibre Channel at the Disaster Recovery site for all hosts.
B. SnapMirror and iSCSI at the Disaster Recovery site for all hosts.
C. a combination of Fibre Channel and iSCSI.
D. MetroCluster and NAS.
Answer: B
13. Which is true regarding the use of a shortwave multimode fiber cable at 2Gb?
A. Multimode fiber can be used for MAN connections.
B. Multimode fiber can be used for WAN connections.
C. Multimode fiber can be used for up to 20k.
D. Multimode fiber can be used for up 300 meters.
Answer: D
14. When zoning by World Wide Node Name (WWNN) is deployed and a host HBA is replaced, no zone
changes need to be made. (True or False?)
A. True
B. False
Answer: B
15. Hard zoning is implemented at the ASIC level. (True or False?)
A. True
B. False
Answer: A
16. What type of zoning is based on World Wide Port Name?
A. hard
B. port
C. soft
D. WWPN
Testinside
TestInside Help You Pass Any IT Exam
Answer: C
17. A customer has a 4-node SUN cluster configuration, and each node has 2 dual-ported HBAs. What is
the minimum number of igroups that need be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A
18. In a FC or IP SAN, what is the proper procedure to obtain a consistent Snapshot of an application’s
data?
A. Quiesce Application, Flush Filesystem Buffers, Take Snapshot
B. Flush Filesystem Buffers, Quiesce Application, Take Snapshot
C. Quiesce Application, Take Snapshot
D. Take Snapshot
Answer: A
19. Your customer will connect two new servers and two new storage ports to the McData switch. There are
only 4 ports available. The customer asks for the best port assignments for availability.
Which two port assignments would you suggest? (Choose two.)
go NS0-501 home :http://www.000-200.com/NS0-501/